Ossur Blue Form Fit Pro Wrist Compression Sleeve
Designed to ease pain and inflammation, the Ossur Blue Form Fit Pro Wrist Compression Sleeve is suitable for tendonitis, arthritis and overuse discomfort. This sleeve conforms to the wrist for a comfortable fit, and is constructed for optimum breathability.
What's Included?
Who Can Make Gains with the Ossur Form Fit Pro Wrist Sleeve?
This compressive sleeve is designed to keep you cool while you move, supporting injured wrists and preventing further injury. It is designed for wrist conditions that may benefit from compression, including the following:
- Rheumatic arthritis
- Wrist sprains and strains
- Overuse
- Wrist tendonitis
- Other chronic wrist pain conditions
Key Features and Benefits
- Malleable aluminium stays conform to the wrist anatomy
- CoolVent technology in basal thumb area for comfort and breathability
- 3D MotionTech knit is ideal for compressing the area and moisture wicking
- FoldLock system offers a secure fit and easier donning/doffing
- Flexible StayBilizer technology aligns the joint to an optimal position
Sizing of the Ossur Form Fit Pro Wrist Compression Sleeve
This wrist sleeve is available in a range of sizes that should suit most users. Measure your wrist circumference at the level of the radial styloid with the hand outstretched at 0 degrees of flexion, as shown below. Compare your measurement with the table below and select your size from the drop-down menu at the top of the page.
Size | Wrist Circumference |
Extra Small | 14 - 15cm |
Small | 15 - 16cm |
Medium | 16 - 17cm |
Large | 17 - 18cm |
Extra Large | 18 - 19cm |
XX-Large | 19 - 20cm |
Is This Wrist Support Breathable?
The Ossur Pro Wrist Sleeve is constructed with MotionTech knit fabric for compression and a good fit. This material is proven to offer exceptional moisture wicking and breathability, keeping you cool during wear. CoolVent technology is the thumb base area further offers breathability and comfort.
Is the Ossur Pro Wrist Sleeve Comfortable?
This compression sleeve features malleable aluminium stays for a customised, comfortable fit. These stays can also be adjusted to conform to your wrist's anatomy.
How Do I Apply the Form Fit Pro Wrist Sleeve?
- Fold the top edge of the device outward so that the FoldLock edge becomes visible (Fig 1).
- Grasp the device and pull over the hand, so that the wrist is enclosed (Fig 2).
- Unfold the top part of the device so that the FoldLock edge is in contact with the skin (Fig 3).
- Fasten the RadialStrap onto the device and wrap it around the wrist. The bony prominence on the outside of the wrist (Ulnar Styloid Process) should be enclosed by the oval cut-out (Fig 4).
- The aluminium stay on the palm of the hand can be removed from the device in order to bend to suit the contours of your wrist. To do this, pull the stay out of the pocket on the inside of the device (Fig 5).
How Do I Remove the Device?
To remove the Pro Wrist Support, simply undo the strap and fold the top edge of the device outward so that the edge is visible. Grip the device and pull it off the wrist.
What Other Options Are Available?
The Ossur Form Fit Wrist Sleeve is also available in a black version.
Washing Instructions
Machine-wash with a mild detergent at cold temperature (30°C) and air dry. Wash regularly to retain the compression of the textiles. Do not tumble dry, iron, bleach, or wash with fabric softener, and ensure to secure the hook and loop fasteners before washing to avoid damaging the textiles.
Please note that this device contains natural rubber latex which may cause allergic reactions.